Sound & headphones
iPod headphone jack not working
Headphone jack loose, broken, or no sound from the headphones? Pick what happens and your model to see the free checks first, then the likely causes and what each fix costs.
What exactly happens?
Which iPod do you have?
Most common causes, by model
Also searched as headphone jack · fix headphone jack · headphone jack repair · replace headphone jack · repair headphone jack · headphones not working · headphone jack problem · headphone socket · earphones don't work
Apple's checks first: the Hold switch off, the plug pushed in all the way and the volume up. Then wiggle the plug in the jack and try another pair of headphones. If the sound still cuts out, crackles or plays in one ear, the headphone jack or its cable is worn: a new headphone jack fixes it.
Free checks first
- Put the Hold switch firmly in the unlocked position. A locked iPod ignores every button.
- Push the headphone plug in all the way.
- Make sure the volume is turned up.
- Wiggle the headphone plug while it is in the jack. If that doesn't fix it, try another pair of headphones. If that fails too, the headphone jack or its cable is the likely fault.
- Try it in a speaker dock: sound from the dock but not from the headphones points to the headphone jack; no sound from either points to the logic board.
iPod Classic (A1238) headphone jack not workingiPod Classic 6th Gen (A1238) headphone jack not workingiPod Classic 7th Gen (A1238) headphone jack not working
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
-
Next most likely
Logic board
If a new headphone jack doesn't bring the sound back, or there is no sound from the headphones or from a speaker dock, the logic board is the likely fault. We fix it by replacing the logic board.
Replacement Logic Board
More causes on this page, depending on what happens
- Headphone jack cable not fully in, or its latch openStarted after a repair or part swap
- A connector not seated after the repairStarted after a repair or part swap
- Faulty replacement headphone jackStarted after a repair or part swap
iPod Video (A1136) headphone jack not workingiPod Video 5th Gen (A1136) headphone jack not working
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
-
Next most likely
Logic board
If a new headphone jack doesn't bring the sound back, or there is no sound from the headphones or from a speaker dock, the logic board is the likely fault. We fix it by replacing the logic board.
Replacement Logic Board
30GB 5G · 30GB 5.5G Enhanced · 60GB 5G · 80GB 5.5G Enhanced
More causes on this page, depending on what happens
- Headphone jack cable not fully in, or its latch openStarted after a repair or part swap
- A connector not seated after the repairStarted after a repair or part swap
- Faulty replacement headphone jackStarted after a repair or part swap
iPod 4th Gen or iPod Photo (A1059 and A1099) headphone jack not workingiPod 4th Gen (A1059) headphone jack not workingiPod Photo (A1099) headphone jack not working
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Also possible
Logic board
If a new headphone jack doesn't bring the sound back, or there is no sound from the headphones or from a speaker dock, the logic board is the likely fault. We fix it by replacing the logic board.
Replacement Logic Board
Replacement Logic Board
Late 2004 to early 2005 · Mid-2005
More causes on this page, depending on what happens
- Headphone jack cable not fully in, or its latch openStarted after a repair or part swap
- A connector not seated after the repairStarted after a repair or part swap
- Faulty replacement headphone jackStarted after a repair or part swap
iPod Mini (A1051) headphone jack not workingiPod Mini 1st Gen (A1051) headphone jack not workingiPod Mini 2nd Gen (A1051) headphone jack not working
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
-
Next most likely
Logic board
If a new headphone jack doesn't bring the sound back, or there is no sound from the headphones or from a speaker dock, the logic board is the likely fault. We fix it by replacing the logic board.
Replacement Logic Board
Replacement Logic Board
More causes on this page, depending on what happens
- Headphone jack board not pressed fully onto the logic boardStarted after a repair or part swap
- A connector not seated after the repairStarted after a repair or part swap
- Faulty replacement headphone jackStarted after a repair or part swap
iPod 3rd Gen (A1040) headphone jack not workingiPod 3rd Gen (A1040) headphone jack not working
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
-
Next most likely
Logic board
If a new headphone jack doesn't bring the sound back, or there is no sound from the headphones or from a speaker dock, the logic board is the likely fault. We fix it by replacing the logic board.
Replacement Logic Board
More causes on this page, depending on what happens
- Headphone jack cable not fully in, or its latch openStarted after a repair or part swap
- A connector not seated after the repairStarted after a repair or part swap
- Faulty replacement headphone jackStarted after a repair or part swap
Headphone jack loose
Also searched as loose headphone jack
The plug sits loosely or slips out, and the sound cuts in and out: the headphone jack is worn.
Free checks first
- Wiggle the headphone plug while it is in the jack. If that doesn't fix it, try another pair of headphones. If that fails too, the headphone jack or its cable is the likely fault.
- On the 5th, 6th and 7th Gen, a worn jack or a loose plug can also stop the song: unplugging the headphones pauses it.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Headphone jack broken
Also searched as broken headphone jack
The headphone jack is cracked or bent, or the plug no longer goes in.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Headphone jack one ear
Also searched as headphone jack only plays one side
Sound in one ear only.
Free checks first
- Push the headphone plug in all the way.
- Wiggle the headphone plug while it is in the jack. If that doesn't fix it, try another pair of headphones. If that fails too, the headphone jack or its cable is the likely fault.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Clean headphone jack
Also searched as headphone jack cleaning
Lint or dirt in the jack can stop the plug from going in all the way. Turn the iPod off, shine a light into the jack and lift out any lint with a wooden or plastic toothpick, never metal. If the plug still won't go in fully, the jack needs replacing.
Free checks first
- Push the headphone plug in all the way.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Fix headphone jack without opening it
Without opening the iPod you can check the plug, the headphones and the jack opening: push the plug in all the way, try another pair and clear any lint. A worn or broken jack sits inside: replacing it means opening the iPod, or sending it to us.
Free checks first
- Push the headphone plug in all the way.
- Wiggle the headphone plug while it is in the jack. If that doesn't fix it, try another pair of headphones. If that fails too, the headphone jack or its cable is the likely fault.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Worn or damaged headphone jack
A worn, damaged or corroded headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. On the 4th Gen and Photo, one ear or crackling is the headphone jack board itself; its flex cable is the suspect when the iPod sticks on Hold. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
-
Next most likely
Headphone jack flex cable
On the 4th Gen and Photo the headphone jack connects to the logic board through a thin flex cable. A cable that is cracked, or not fully in at either end, can keep the iPod stuck on Hold or cut the sound; for one ear or crackling, the jack board itself is the more likely fault.
Free check first If the iPod was opened, check that the flex cable is fully in and its latch is closed.
Headphone Jack Flex Cable
Headphone Jack Flex Cable
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Worn or damaged headphone jack
A worn or damaged headphone jack cuts the sound out, crackles, or plays in one ear only, often when you move the plug. A new headphone jack fixes it.
Free check first Move the plug gently while a song plays: if the sound cuts out or crackles, the jack is worn.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Started after a repair or part swap
The headphones stopped working after the iPod was opened or a part was swapped.
iPod Classic 6th and 7th GeniPod Classic 6th GeniPod Classic 7th Gen
-
Most likely
Headphone jack cable not fully in, or its latch open
After the iPod has been opened, a headphone jack cable that isn't pushed fully in, or its latch left open, stops the headphone jack, and the Hold switch on it, from working.
Free check first Open it again, push the headphone jack cable fully in and close its latch.
-
Next most likely
A connector not seated after the repair
After a battery or part swap, a connector that is not fully seated can leave the iPod dead or half-working. We can also look at it: the free diagnostic finds the issue and whether it can be fixed without new parts.
Free check first Open it again and push every connector you touched fully back in.
-
Also possible
Faulty replacement headphone jack
If the sound still comes from one ear only after a new headphone jack was fitted, the replacement jack is likely faulty.
Replacement Headphone Jack
Step-by-step guide iPod Classic 6th/7th Gen headphone jack and Hold switch replacement (13 steps)
iPod Video 5th GeniPod Video 5th Gen
-
Most likely
Headphone jack cable not fully in, or its latch open
After the iPod has been opened, a headphone jack cable that isn't pushed fully in, or its latch left open, stops the headphone jack, and the Hold switch on it, from working.
Free check first Open it again, push the headphone jack cable fully in and close its latch.
-
Next most likely
A connector not seated after the repair
After a battery or part swap, a connector that is not fully seated can leave the iPod dead or half-working. We can also look at it: the free diagnostic finds the issue and whether it can be fixed without new parts.
Free check first Open it again and push every connector you touched fully back in.
-
Also possible
Faulty replacement headphone jack
If the sound still comes from one ear only after a new headphone jack was fitted, the replacement jack is likely faulty.
Step-by-step guide iPod Video 5th Gen headphone jack and Hold switch replacement (13 steps)
iPod 4th Gen and iPod PhotoiPod 4th GeniPod Photo
-
Most likely
Headphone jack cable not fully in, or its latch open
After the iPod has been opened, a headphone jack cable that isn't pushed fully in, or its latch left open, stops the headphone jack, and the Hold switch on it, from working.
Free check first Open it again, push the headphone jack cable fully in and close its latch.
-
Next most likely
A connector not seated after the repair
After a battery or part swap, a connector that is not fully seated can leave the iPod dead or half-working. We can also look at it: the free diagnostic finds the issue and whether it can be fixed without new parts.
Free check first Open it again and push every connector you touched fully back in.
-
Also possible
Faulty replacement headphone jack
If the sound still comes from one ear only after a new headphone jack was fitted, the replacement jack is likely faulty.
Step-by-step guide iPod 4th Gen and iPod Photo headphone jack replacement (11 steps)
iPod Mini 1st and 2nd GeniPod Mini 1st GeniPod Mini 2nd Gen
-
Most likely
Headphone jack board not pressed fully onto the logic board
On the Mini the headphone jack and the Hold switch sit on a small board that plugs straight onto the logic board, with no cable or latch. After the iPod has been opened, a jack board that isn't pressed fully onto its connector stops the headphone jack, and the Hold switch on it, from working. If the jack board's connector has torn off the logic board, our fix is a new logic board. Rather than solder on an inferior aftermarket part (a third-party connector), we fit an original Apple logic board to ensure the highest quality repair.
Free check first Open it again and press the headphone jack board fully onto its connector on the logic board.
-
Next most likely
A connector not seated after the repair
After a battery or part swap, a connector that is not fully seated can leave the iPod dead or half-working. We can also look at it: the free diagnostic finds the issue and whether it can be fixed without new parts.
Free check first Open it again and push every connector you touched fully back in.
-
Also possible
Faulty replacement headphone jack
If the sound still comes from one ear only after a new headphone jack was fitted, the replacement jack is likely faulty.
Headphone Jack / Hold Switch Assembly
Headphone Jack / Hold Switch Assembly
Step-by-step guide iPod Mini 1st/2nd Gen headphone jack and Hold switch replacement (12 steps)
iPod 3rd GeniPod 3rd Gen
-
Most likely
Headphone jack cable not fully in, or its latch open
After the iPod has been opened, a headphone jack cable that isn't pushed fully in, or its latch left open, stops the headphone jack, and the Hold switch on it, from working.
Free check first Open it again, push the headphone jack cable fully in and close its latch.
-
Next most likely
A connector not seated after the repair
After a battery or part swap, a connector that is not fully seated can leave the iPod dead or half-working. We can also look at it: the free diagnostic finds the issue and whether it can be fixed without new parts.
Free check first Open it again and push every connector you touched fully back in.
-
Also possible
Faulty replacement headphone jack
If the sound still comes from one ear only after a new headphone jack was fitted, the replacement jack is likely faulty.
Step-by-step guide iPod 3rd Gen headphone jack and Hold switch replacement (12 steps)
Not sure — free diagnostic
Mail us your iPod and we test it and send you a free repair quote. If you don't like the price, we ship it back at our expense.
Free
Questions
What size is the iPod headphone jack?
A standard 3.5 mm stereo headphone jack, on every model: Apple's tech specs list a "3.5-mm stereo headphone jack" (a stereo minijack).
Which iPod do you have?
The page shows the causes for the iPod you pick.
Not sure which one? Identify your iPod