iPod 3G — Replacement Dock Connector Bezel

For the iPod 3rd Gen

Used (Apple Original) · Model A1040

$33.90

How do you want it fixed?
Upgrade and save
Shipping box and prepaid label

Pay at checkout by card, PayPal, Shop Pay, Apple Pay or Google Pay.

  • Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
  • 1-year limited warranty · 30-day returns from delivery
  • Free pry tool in the box
  • US shipping is about $6 to $9 by USPS Ground Advantage; free on orders of $200 or more

Questions about this part? Chat with us or email sales@imods.com.

Not sure what's wrong? Get your free repair quote

Part details

About this part

Overview

Dock Bezel 10GB / 15GB / 20GB / 30GB / 40GB

Replacement housing or trim part for iPod 3G. Use it to restore fit, finish, color or visible damage rather than to fix an internal electronics fault.

Fitment snapshot

FitsiPod 3G
Variant matchSee Compatible Variants
ReleasedApril 28, 2003
TypeDock Bezel

What Is Included

✓ Replacement Dock Connector Bezel ✓ One plastic pry tool ✓ 1-year limited warranty

Fit and specs

Specifications & Fitment

Part Details

Detail Value
Model Number A1040
EMC EMC 1961
Condition Used — factory original Apple part. Normal cosmetic wear expected.
Part Type Plastic dock connector bezel / trim: the exterior trim around the 30-pin opening only. The 30-pin port itself is soldered to the logic board (a broken port is fixed by replacing the logic board), so charging or sync trouble is not fixed by this part.

Compatible Variants

Order Number Capacity Color Case Compatible Notes
M8976LL/A 10GB White thin Yes —
M8946LL/A 15GB White thin Yes —
M9460LL/A 15GB White thin Yes —
M9244LL/A 20GB White thin Yes —
M8948LL/A 30GB White thick Yes —
M9245LL/A 40GB White thick Yes —

Install and repair

Step-by-step guide

iPod 3rd Gen back panel replacement

  • DifficultyModerate
  • Steps13

Tools: Plastic opening tools (two), Plastic spudger, Phillips #00 screwdriver, Anti-static wrist strap or mat, Soft cloth, FireWire charger and headphones

  1. Unplug it, switch it off, lock itUnplug any cable, then switch the iPod off: press and hold Play/Pause. Slide the Hold switch to locked, so the orange shows, and lay it face up on the cloth.
  2. Free the clipsAngle a plastic opening tool toward the steel back and work it into the seam near the middle of a long side. Release the clips from the middle toward each end, then down the other long side, then the two on the bottom edge. Our opening guide covers every move.

Read the full guide: all 13 steps

Install Overview

Rather not open it? Choose We Fix It above: mail your iPod in and we fit it. Turnaround is typically 1–3 business days on our bench. 1-year limited warranty.

Questions

Frequently Asked Questions

Is this an iPod Classic?

Apple's 'Classic' branding started with the 6th Generation (2007). This is the iPod 3rd Generation (2003), model A1040. Apple's official name for this model is iPod (Dock Connector).

Will this fix internal electronics symptoms?

No. Housing and trim parts are for fit, finish, color, alignment, or visible damage. Diagnose power, storage, audio, screen, and control faults separately.

Free diagnostic

Broken iPod? We can help.

Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.

How mail-in repair works

  1. Order the free diagnostic

    Choose your iPod. Add our shipping box and prepaid label if you need one.

  2. Mail us your iPod

    Pack it with your work order. No printer? Put a note in the box with your name, return address, email, iMods order number and what is wrong.

  3. Approve your quote

    We test it and email your free repair quote. Most repairs are finished within 1 to 3 business days after you approve the quote.