iPod Mini 2nd Generation — Replacement Top Screws (2x PH00)

For the iPod Mini 2nd Gen

Used (Apple Original) · Model A1051

$24.90

How do you want it fixed?
Upgrade and save
Shipping box and prepaid label

Pay at checkout by card, PayPal, Shop Pay, Apple Pay or Google Pay.

  • Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
  • 1-year limited warranty · 30-day returns from delivery
  • Free pry tool in the box
  • US shipping is about $6 to $9 by USPS Ground Advantage; free on orders of $200 or more

Questions about this part? Chat with us or email sales@imods.com.

Not sure what's wrong? Get your free repair quote

Part details

About this part

Overview

Screw Set

Replacement screw hardware for iPod Mini 2nd Generation. Use it when original screws are missing, stripped, damaged, or lost during service. This part does not fix electronics, storage, audio, display, or control faults.

Fitment snapshot

FitsiPod Mini 2nd Generation
ReleasedFebruary 23, 2005
TypeScrew Set

What Is Included

✓ 2x top screws (PH00) ✓ One plastic pry tool ✓ 1-year limited warranty

Fit and specs

Specifications & Fitment

Part Details

Detail Value
Model Number A1051
EMC EMC 2044
Condition Used — factory original Apple part. Normal cosmetic wear expected.

Compatible Variants

Order Number Capacity Color Case Compatible Notes
M9802LL/A 4GB Blue — Yes— compatible Stock match
M9806LL/A 4GB Green — Yes— compatible Stock match
M9804LL/A 4GB Pink — Yes— compatible Stock match
M9800LL/A 4GB Silver — Yes— compatible Stock match
M9803LL/A 6GB Blue — Yes— compatible Stock match
M9807LL/A 6GB Green — Yes— compatible Stock match
M9805LL/A 6GB Pink — Yes— compatible Stock match
M9801LL/A 6GB Silver — Yes— compatible Stock match

Install and repair

Step-by-step guide

How to open the iPod Mini 1st/2nd Gen

  • DifficultyModerate
  • Steps13

Tools: Phillips #00 screwdriver, Thin plastic pry tool, Small flat blade (optional), Spudger, Small snap-ring pliers (optional), Hair dryer, Tweezers, Anti-static wrist strap or mat, Adhesive for the caps (optional)

  1. Lock itUnplug any cable, then slide the Hold switch to Hold, so the iPod can't switch itself on while you work, and wait for the screen to go blank. Note which side the switch is on now: you'll match the cap's slider to the switch at the end.
  2. Warm and lift the top capThe white cap at the headphone end is glued down. Give it a few seconds of warm air from a hair dryer set to low, aimed at the cap only. Keep it short: the battery is inside the tube and must not get hot.

Read the full guide: all 13 steps

Install Overview

Rather not open it? Choose We Fix It above: mail your iPod in and we fit it. Turnaround is typically 1–3 business days on our bench. 1-year limited warranty.

Questions

Frequently Asked Questions

How do I choose the right screw set?

These two PH00 screws fit every iPod mini (1st or 2nd Gen); confirm only that you have a mini.

Will a screw set fix electronics symptoms?

No. Screws are passive fasteners for reassembly. Diagnose power, storage, audio, display, and control faults separately.

What tools do I need to install these screws?

These are PH00 (Phillips #00) screws. Use a PH00 driver — a Torx driver will not seat in PH00 heads. The screwdriver is not included with the screw set.

Where are these two screws on the iPod?

At the top of the aluminum tube, under the white top bezel, holding the headphone-jack and Hold-switch board to the casing. The bezel is adhesive-backed and has to come off first — which is why these two screws are the pair most often lost or rounded during a repair.

Will these screws fit a first-generation iPod mini?

Yes. The same two top screws serve both mini generations, in the same place on either one: under the white top bezel, holding the headphone-jack and Hold-switch board to the casing. Still generation-matched, and not to be swapped: the click wheel (it plugs in but gives no response), the display and the logic board.

Is this for a full-size hard-drive iPod?

The iPod mini is a separate Apple product line from full-size hard-drive iPods. This is the iPod mini 2nd Generation.

Free diagnostic

Broken iPod? We can help.

Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.

How mail-in repair works

  1. Order the free diagnostic

    Choose your iPod. Add our shipping box and prepaid label if you need one.

  2. Mail us your iPod

    Pack it with your work order. No printer? Put a note in the box with your name, return address, email, iMods order number and what is wrong.

  3. Approve your quote

    We test it and email your free repair quote. Most repairs are finished within 1 to 3 business days after you approve the quote.