Housing
for the iPod Mini 2nd Gen A1051
- 1-year limited warranty
Is this the right part?
For the iPod Mini 2nd GenModel A1051
Also for the iPod Mini 2nd Gen: Blue $45.95 · Green $45.95 · Pink $45.95 · Custom color (New) $45.95 · See all
Doing it yourself?
iPod Mini 1st/2nd Gen housing replacement guide ›iPod Mini 2nd Generation — Replacement Aluminum Housing (Silver)
For the iPod Mini 2nd Gen
Used (Apple Original) · Model A1051
$45.95
Also for the iPod Mini 2nd Gen: Blue $45.95 · Green $45.95 · Pink $45.95 · Custom color (New) $45.95 · See all
Sold out
Not for sale right now
We are not selling this part at the moment.
- Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
- 1-year limited warranty · 30-day returns from delivery
- Free pry tool in the box
- Completed repairs aren't refundable. If a part we fitted fails within a year, we repair it again.
- US shipping is about $6 to $9 by USPS Ground Advantage; free on orders of $200 or moreYou pay the postage to mail your iPod to us, or add our box and prepaid label. Shipping back to you is about $6 to $9 at checkout; free on orders of $200 or more
Questions about this part? Chat with us or email sales@imods.com.
Not sure what's wrong? Get your free repair quotePart details
About this part
Overview
Replacement housing or trim part for iPod Mini 2nd Generation. Use it to restore fit, finish, color or visible damage rather than to fix an internal electronics fault.
Fitment snapshot
What Is Included
Included
Fit and specs
Specifications & Fitment
Part Details
| Detail | Value |
|---|---|
| Model Number | A1051 |
| EMC | EMC 2044 |
| Condition | Used — factory original Apple part. Normal cosmetic wear expected. |
| Material | Anodized aluminum |
| Colors | Silver, Blue, Pink, Green |
| Dimensions | 3.6 x 2.0 x 0.5" |
Compatible Variants
| Order Number | Capacity | Color | Case | Compatible | Notes |
|---|---|---|---|---|---|
| M9802LL/A | 4GB | Blue | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9806LL/A | 4GB | Green | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9804LL/A | 4GB | Pink | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9800LL/A | 4GB | Silver | — | Yes | — |
| M9803LL/A | 6GB | Blue | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9807LL/A | 6GB | Green | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9805LL/A | 6GB | Pink | — | Yes— compatible | Color swap — physically fits, different color from original |
| M9801LL/A | 6GB | Silver | — | Yes | — |
Install and repair
Step-by-step guide
iPod Mini 1st/2nd Gen housing replacement
Tools: Phillips #00 screwdriver, Thin plastic pry tool, Spudger, Small snap-ring pliers or a small flat tool, Hair dryer, Masking tape, Tweezers, Anti-static wrist strap or mat, Adhesive for the caps (optional), Isopropyl alcohol and thin double-sided tape
- Lock itUnplug any cable, then slide Hold on and let the screen go blank. Note which side the switch is on: the top cap's slider has to match it.
- Top cap and two screws offGive the glued top cap a brief burst of warm air from a hair dryer on low, aimed at the cap only, then lift it a little at a time round the seam; the plastic is soft, so lift rather than lever. Take out the two Phillips #00 screws under it. Our opening guide shows each move.
Install Overview
Rather not open it? Choose We Fix It above: mail your iPod in and we fit it. Turnaround is typically 1–3 business days on our bench. 1-year limited warranty.
Questions
Frequently Asked Questions
How do I choose the right cosmetic part?
This tube fits every iPod mini (1st or 2nd Gen, 4GB or 6GB): choose by color and condition.
Is this for a full-size hard-drive iPod?
The iPod mini is a separate Apple product line from full-size hard-drive iPods. This is the iPod mini 2nd Generation.
Will this fix internal electronics symptoms?
No. Housing and trim parts are for fit, finish, color, alignment, or visible damage. Diagnose power, storage, audio, screen, and control faults separately.
Does the silver housing fit both 4GB and 6GB Mini 2G models?
Yes. The Mini 2G aluminum housing fits the 4GB and 6GB A1051 / EMC 2044 models; choose color by the exterior finish you want.
Does this housing include the click wheel or bezels?
No. This listing is for the aluminum housing. The click wheel, top bezel, bottom bezel, logic board, battery, and storage drive are separate parts.
Will this housing fit a first-generation iPod mini?
Yes. Both mini generations use the same aluminum tube (0.5 in deep on either one), so the shell carries over; three parts do not — the click wheel (it plugs into the other generation's board but gives no response), the display and the logic board — keep those with the iPod they came from.
Free diagnostic
Broken iPod? We can help.
Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.
How mail-in repair works
Order the free diagnostic
Choose your iPod. Add our shipping box and prepaid label if you need one.
Mail us your iPod
Pack it with your work order. No printer? Put a note in the box with your name, return address, email, iMods order number and what is wrong.
Approve your quote
We test it and email your free repair quote. Most repairs are finished within 1 to 3 business days after you approve the quote.