iPod Video 5G — Used Apple Original Click Wheel (White)

For the iPod Video 5th Gen

Used (Apple Original) · Model A1136

$24.95

Also for the iPod Video 5th Gen: Black (Used Apple original) $24.95 · Custom color (New) $30.95 · See all

How do you want it fixed?
Upgrade and save
Shipping box and prepaid label

Pay at checkout by card, PayPal, Shop Pay, Apple Pay or Google Pay.

  • Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
  • 1-year limited warranty · 30-day returns from delivery
  • Free pry tool in the box

Questions about this part? Chat with us or email sales@imods.com.

Not sure what's wrong? Get your free repair quote

Part details

About this part

Overview

iPod Video 5G / 5.5G A1136 / EMC 2065 White front

White click wheel for iPod 5th Generation Video and 5.5G Enhanced. Choose white for white-front models; black-front models should use the black click wheel. Run the Hold switch and hard-reset checks before treating control symptoms as a click-wheel failure.

Fitment snapshot

Apple modelA1136 / EMC 2065
Generation5G and 5.5G Enhanced
Capacity30GB, 60GB, and 80GB
Factory color matchWhite front models

What Is Included

✓ Replacement Click Wheel (White) ✓ One plastic pry tool ✓ 1-year limited warranty

Fit and specs

Specifications & Fitment

Part Details

Detail Value
Model Number A1136
EMC EMC 2065
Condition Used (Apple Original) click wheel
OEM Part 821-0372-A
Also Listed As 821-0372
Interface ZIF ribbon cable

Compatible Variants

Order Number Capacity Case Compatible Notes
MA146LL/A 30GB thin (0.43 in) Yes— color swap Fits all 5G/5.5G; white differs from this unit’s original color
MA446LL/A 30GB thin (0.43 in) Yes— color swap Fits all 5G/5.5G; white differs from this unit’s original color
MA452LL/A 30GB thin (0.43 in) Yes— color swap Fits U2 Special Edition; standard color differs from the original U2 look
MA664LL/A 30GB thin (0.43 in) Yes— color swap Fits U2 Special Edition; standard color differs from the original U2 look
MA002LL/A 30GB thin (0.43 in) Yes— stock match —
MA444LL/A 30GB thin (0.43 in) Yes— stock match —
MA147LL/A 60GB thick Yes— color swap Fits all 5G/5.5G; white differs from this unit’s original color
MA003LL/A 60GB thick Yes— stock match —
MA450LL/A 80GB thick Yes— color swap Fits all 5G/5.5G; white differs from this unit’s original color
MA448LL/A 80GB thick Yes— stock match —

Not compatible with

  • Nothing by color — this wheel fits every 5G / 5.5G front color; pick the wheel color you want
  • U2 black/red Special Edition models (MA452LL/A or MA664LL/A) — the U2's scroll ring is red and its center button is black. A red ring is not sold as a separate service part; a white or black wheel fits and works, but changes the look.
  • iPod Classic 6G / 7G (A1238) click wheel, part 821-0545-A — not cross-compatible; the iPod Video wheel is 821-0372-A

Install and repair

Step-by-step guide

iPod Video 5th Gen click wheel and center button replacement

  • DifficultyDifficult
  • Steps20

Tools: Plastic opening tools (two or three), Thin plastic picks, Angled tweezers or a small plastic tool, Phillips #00 screwdriver, Small dish for screws, Anti-static wrist strap and mat, Soft, lint-free cloth

  1. Open the caseUnplug any cable, then switch the iPod off and slide Hold to locked. Free the clips with plastic tools: both long sides, then the top (shallow beside the Hold switch, where the screen sits close), then the bottom. Raise the back only about an inch, since two ribbons still join the halves. Our guide to opening the iPod Video covers this in detail.
  2. Unplug the batteryFind the battery's orange ribbon where it plugs into the logic board toward the bottom end. Raise its small brown latch straight up by 1 to 2 mm, evenly at both ends, and slide the ribbon out.

Read the full guide: all 20 steps

Install Overview

Rather not open it? Choose We Fix It above: mail your iPod in and we fit it. Turnaround is typically 1–3 business days on our bench. 1-year limited warranty.

No soldering required

The click wheel connects by a ribbon cable in a ZIF latch, not solder. The dock connector is the soldered part on this model, not the click wheel.

Open and separate the front assembly

Work slowly around clips and plastic tabs before lifting the front panel away from the rear housing.

Protect ZIF latches

Release and reseat the click-wheel ribbon without pulling against a closed latch.

Ground tab matters

A missing or misaligned ground tab can make a good wheel look dead.

Questions

Frequently Asked Questions

Does this include the center button?

No. The center button cap is not included. Order the center-button cap separately if the visible cap is missing, scratched, or color-mismatched.

What if controls stopped working after battery replacement?

Open the iPod and reseat the click-wheel ribbon, confirm the ZIF latch is closed, and make sure the ground tab is aligned. A disturbed ribbon or ground tab can mimic a failed wheel.

Is this an iPod Classic 5th Generation part?

No. Apple's Classic branding started with the 6th Generation. If you searched ipod classic 5th generation click wheel, this is the iPod 5th Generation Video / iPod with Video part, model A1136 / EMC 2065, not a later A1238 Classic part.

Do I need to solder?

No. The click wheel uses a ribbon/ZIF connection. Soldering is not required for the click wheel.

Free diagnostic

Broken iPod? We can help.

Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.

How mail-in repair works

  1. Order the free diagnostic

    Choose your iPod. Add our shipping box and prepaid label if you need one.

  2. Mail us your iPod

    Pack it with your work order. No printer? Put a note in the box with your name, return address, email, order number and what is wrong.

  3. Approve your quote

    We test it and email your free repair quote. Most repairs are finished within 1 to 3 business days after you approve the quote.