iPod Mini 1st Generation — Replacement Plastic Dock Port Bezel
Photo of this part coming soon
iPod Mini 1st Generation — Replacement Plastic Dock Port Bezel
Used (Apple Original) · Model A1051
$36.90
Sold out
Not for sale right now
We are not selling this part at the moment.
- Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
- 1-year limited warranty · 30-day returns from delivery
- Free pry tool in the box
- Completed repairs aren't refundable. If a part we fitted fails within a year, we repair it again.
Part details
About this part
Overview
Replacement housing or trim part for iPod Mini 1st Generation. Use it to restore fit, finish, color, case alignment, or visible damage rather than to fix an internal electronics fault.
Fitment snapshot
Match thickness, color, generation, and nearby hardware before ordering cosmetic or housing parts.
Product Overview
Choose this housing listing to restore the visible fit, finish, or mounting hardware on the iPod Mini 1st Generation.
Use the Compatible Variants table below to confirm capacity, color, or order-number fitment.
This is a fit-and-finish part, so choose it by physical damage, color, part shape, and missing hardware rather than by an electrical symptom.
What Is Included
Condition: Used factory-original part. Quantity and exclusions: The listed part, set, pair, or configuration above is supplied with exactly one plastic pry tool. No other parts, tools, adhesives, or materials are included unless they are explicitly listed above.
In the box: one bottom bezel and one plastic pry tool. Not in the box: the metal retaining bracket that sits directly beneath this bezel, the 30-pin dock connector itself, the aluminum tube, the top bezel, and adhesive — each of those is a separate part.
Quick Buying Check
Buy this when
- Plastic trim damage: Use this bottom bezel check for cracked, missing, stained, chipped, or loose white plastic trim after confirming internal electronics symptoms belong elsewhere.
- The original part is cracked, scratched, dented, bent, missing, loose, or cosmetically worn.
- The model, color, model-specific fitment, and capacity family match this listing.
Do not buy for
- Do not use this part for: a click wheel, screen or logic board from the other Mini generation — those stay generation-specific even though this trim does not.
- Do not use this part for: Full-size hard-drive iPods use a different case design.
- Do not use this part for: a dock port that will not charge or sync, or bent and corroded pins — on this mini the 30-pin port is part of the logic board and this white bezel only frames its opening.
- Do not use this part for: the aluminum tube, the top headphone bezel, the click wheel, logic board, battery, or storage drive.
Fit and specs
Specifications & Fitment
Part Details
| Detail | Value |
|---|---|
| Model Number | A1051 |
| EMC | EMC 1984 |
| Condition | Used — factory original Apple part. Normal cosmetic wear expected. |
| Material | Plastic |
Compatible Variants
| Order Number | Capacity | Color | Case | Compatible | Notes |
|---|---|---|---|---|---|
| M9436LL/A | 4GB | Blue | — | Yes | — |
| M9437LL/A | 4GB | Gold | — | Yes | — |
| M9434LL/A | 4GB | Green | — | Yes | — |
| M9435LL/A | 4GB | Pink | — | Yes | — |
| M9160LL/A | 4GB | Silver | — | Yes | — |
Fitment wording buyers compare
| Wording | What it means on this page |
|---|---|
| fits both mini generations | Correct for this trim: one bezel serves the iPod Mini 1st and 2nd Generation, so order by condition rather than by generation. |
| aluminum tube damage | Names a different part — not the one this page sells. |
| metal dock-port bracket not included | Adjacent part sold separately — not included with this listing. |
Install and repair
Install Overview
Before You Start
Set Hold to locked (orange bar visible) before opening. Confirm the model and variant before opening the iPod.
Treat case opening as the highest handling risk. Work around the seams gently and stop if the shell, clips, or internal stack resist.
Do not pull the halves apart or side-load board sockets. Reseat nearby ribbons and connectors before blaming a replacement housing part.
Confirm thickness, color, screw points, and nearby hardware alignment before pressing the case fully closed.
Repair steps
Documented repair-procedure steps for replacing the housing part on this model (from teardown guides; confirm against your unit before starting):
- Carefully insert a small flathead screwdriver or Jimmy in the seam between the metal casing and white plastic bottom. Use the screwdriver to pry up the white plastic bottom bezel. Be careful not to damage the soft plastic with your screwdriver.
- Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.
Disassembly Guide
Disassembly guide summary: iPod Mini Bottom Bezel Replacement.
Show all 3 installation steps
Carefully slide a small flathead screwdriver or Jimmy into the seam between the metal casing and white plastic bottom. Lever up the white bottom bezel, taking care not to damage the soft plastic.
A small pair of snap-ring pliers is the best tool to take out the metal retaining bracket. You can also lever out the metal retaining bracket beneath the bottom bezel with a flathead screwdriver. Release the bracket by pressing in the corner metal arms first.
Lift the released bracket away and set it aside.
Product-specific placement, reassembly, and check
- Prepare and access. Confirm the exact model and listing fit first. Use the existing steps as a disassembly guide, gather the specified tools, disconnect power where applicable, and keep screws and cable positions organized.
- Place Replacement Plastic Dock Port Bezel. Transfer only the components required by the existing access steps, then align the listed cosmetic or structural part with its clips, openings, and edges.
- Reassemble without force. Reverse only the access steps needed for this repair, keep cables clear of case edges and screw posts, and close clips in stages.
- Validate before final closure. Before final closure, confirm an even fit and verify that buttons, switches, ports, display, and wheel movement remain unobstructed.
Stop condition: Stop if a connector, latch, screw, clip, housing edge, or the replacement part resists normal alignment. Recheck model fit, orientation, cable routing, and trapped hardware instead of forcing it.
After This Repair
| Check | What to do |
|---|---|
| Check trim fit | Confirm the trim sits flush and the port or opening is centered before final closure. |
| Still not fitting cleanly? | Recheck model-specific fitment, screw seating, and nearby clips before forcing the trim into place. |
Troubleshooting
Cosmetic Failure Signs — When to Replace
This housing is a cosmetic part — it does not change how the iPod plays, charges, or syncs. Replace it when the damage is physical:
| Symptom | What it means & what to check |
|---|---|
| Cracked or split white plastic | The trim splits at the corners and along the pry line — usually from an earlier opening, or from a drop onto the dock end of the iPod. |
| Chewed edges and pry marks | Levering the bezel out marks the soft plastic; once the lip is deformed the trim no longer sits down flush against the aluminum tube. |
| Yellowed, dull, or stained white | Age, sunlight and handling take the white off; next to a clean tube and a fresh click wheel the difference shows. |
| The dock opening no longer lines up | The cut-out sits off-center and the cable no longer seats squarely, after the trim was refitted crooked or over a bracket that was not re-seated. |
| Bezel missing, loose, or lifting at one end | This bezel sits over the metal retaining bracket, so trim that will not stay down is often a bracket whose corner arms were bent during an earlier opening. If the whole end of the case is lifting instead, read the battery row in the table below first. |
Not every buyer here is fixing damage: restoring clean white trim after another repair, bringing a gift or keepsake iPod back to presentable condition, and finishing a refreshed shell while the case is already open are just as common. This trim is white on every case color — Silver, Blue, Pink, Green and Gold alike — so there is no color to match; what you match is the model and which end of the tube the trim belongs to.
Do Not Buy / Problems This Housing Part Does Not Fix
| Situation | Start here instead |
|---|---|
| You have a full-size hard-drive iPod with a different case design. | This is a different model — check your order number and generation before ordering. |
| The only problem is an internal electronic symptom with no physical damage to this part | Start on the part that matches the symptom: battery for power and runtime, hard drive (4GB), the hard-drive cable or the flash storage kit for storage and restore faults, headphone jack / hold switch for audio and Hold, click wheel for controls, LCD screen for display, and logic board for board-side or multi-system faults. This trim is not in the path of any of them. |
| The issue is charging, audio, storage, display, or controls rather than fit, finish, or visible housing damage | Start with the hard drive, the flash storage kit, or the drive cable check. |
| The replacement would not match the model-specific fitment, color, or capacity family you are repairing | Confirm the exact model, capacity, connector, and case variant before ordering. |
| It will not charge or sync, or the computer does not see it | Charging or sync trouble? On this mini the 30-pin port is part of the logic board — this part only locates or trims it — so see the logic-board page. The metal bracket under this bezel only holds the port in place, and this bezel only frames its opening. |
| The trim will not sit down, or the shell will not close flat | On this model the battery lies behind the display, so a pack that has swollen bows the internal stack, lifts the trim and can leave a dark pressure mark on the screen. New trim will not hold a swollen pack flat — start on the battery page. |
Worth Knowing
- Bottom bezel houses the 30-pin dock connector opening.
- Must be removed to slide internal components out of the aluminum tube.
- This small white bottom trim frames the 30-pin dock connector opening.
- This trim is shared by both mini generations — choose it by condition, not by generation. The click wheel, the screen and the logic board are NOT shared: the two generations’ click-wheel connectors are different sizes, so a wheel from one will not plug into the other’s board.
- This trim is white on every case color — Silver, Blue, Pink, Green and Gold alike — so there is no color to match; what you match is the model and which end of the aluminum tube the trim belongs to.
- Under this bezel sits the metal retaining bracket that locates the dock port. It is a separate part, it is not included here, and it is the piece most often bent or lost during an opening — release it by pressing its corner arms in first.
- The trim at the other end of the same tube is the top bezel, which frames the headphone jack and Hold switch. If the iPod has been opened more than once, both are usually marked.
Questions
Frequently Asked Questions
How do I choose the right cosmetic part?
Match the model generation first, then confirm capacity 4GB and that you need the bottom dock bezel rather than the top headphone bezel. This trim is white on every case color, so there is no color to match; check the clip layout and nearby hardware before ordering.
Is this for a full-size hard-drive iPod?
The iPod mini is a separate Apple product line from full-size hard-drive iPods. This is the iPod mini 1st Generation.
Will this fix internal electronics symptoms?
No. Housing and trim parts are for fit, finish, color, alignment, or visible damage. Diagnose power, storage, audio, screen, and control faults separately.
How do I confirm this is the right exterior part?
Match the exact iPod Mini 1st Generation model, visible part shape, color or finish goal, and any capacity or model-specific fitment note before ordering Replacement Plastic Dock Port Bezel.
You May Also Want
Both bezels are typically replaced together for consistent cosmetic appearance.
Related: Metal Dock Port BracketThe bracket that sits directly beneath this bezel and locates the dock port — easily bent or lost during an opening.
Related: Replacement Top Screws (2x PH00)The two screws at the other end of the tube, under the top bezel — the pair most often rounded or lost when a mini is opened.
Search terms
Why people land on this part
Also searched as: ipod mini 1st generation housing part, buy replacement bottom bezel for ipod mini first generation, ipod mini first generation bottom bezel replacement service, buy replacement bottom bezel for 1st generation ipod mini, ipod mini 1st generation bottom bezel replacement service, ipod mini first generation bottom bezel replacement guide, iPod mini 1st generation plastic dock port bezel replacement, bottom cap, iPod mini plastic bottom bezel, iPod mini end cap, white end caps, iPod mini dock connector bezel.
Free diagnostic
Broken iPod? We can help.
Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.