iPod Classic 6G — Replacement Metal LCD Shield
Photo of this part coming soon
iPod Classic 6G — Replacement Metal LCD Shield
Used (Apple Original) · Model A1238
$36.90
Sold out
Not for sale right now
We are not selling this part at the moment.
- Used (Apple Original). Tested: installed in a working iPod and checked before it ships.
- 1-year limited warranty · 30-day returns from delivery
- Free pry tool in the box
- Completed repairs aren't refundable. If a part we fitted fails within a year, we repair it again.
Part details
About this part
Overview
Internal metal shield/bracket that backs and protects the LCD — not the screen, not exterior trim; no color/finish role.
Fitment snapshot
One shield fits every iPod Classic 6G/7G (A1238) — there are no capacity, case-depth or color variants of this part.
Product Overview
Choose this metal shield listing to re-seat and protect the internal hardware it supports on the iPod Classic 6th Generation when the original cushions, bracket, or shield are missing, hardened, torn, bent, or compressed.
The Compatible Variants table below lists every order number this shield fits; it is the same part for all of them.
This is an internal support part, so choose it when the original cushions, bracket, or shield are missing, hardened, torn, bent, or compressed — not for an electrical, storage, or cosmetic symptom.
What Is Included
Condition: Used factory-original part. Quantity and exclusions: The listed part, set, pair, or configuration above is supplied with exactly one plastic pry tool. No other parts, tools, adhesives, or materials are included unless they are explicitly listed above.
Quick Buying Check
Buy this when
- Bent, cracked, or missing LCD shield: The metal shield behind the display is bent, cracked, corroded, or missing after damage or a prior repair.
- Display pressure marks after reassembly: Pressure marks or flex on the display point to missing or damaged shield support.
Diagnose first when
- Diagnose first — Blank, white, black, lined, or backlight display: Blank screen, white or black display, missing backlight, or lines on the screen. The shield is passive structural support and will not fix this symptom family.
- No capacity or case-depth match to get right: this one shield is listed for every iPod Classic 6G/7G build.
- Diagnose first — Center / Select button or specific control failure: The center, middle, or Select button feels stuck, sits low, or stops selecting.
Fit and specs
Specifications & Fitment
Part Details
| Detail | Value |
|---|---|
| Model Number | A1238 |
| EMC | EMC 2173 |
| Condition | Used — factory original Apple part. Normal cosmetic wear expected. |
Compatible Variants
| Order Number | Capacity | Color | Case | Compatible | Notes |
|---|---|---|---|---|---|
| MB147LL/A | 80GB | Black | thin (0.41 in) | Yes | — |
| MB029LL/A | 80GB | Silver | thin (0.41 in) | Yes | — |
| MB565LL/A | 120GB | Black | thin (0.41 in) | Yes | — |
| MB562LL/A | 120GB | Silver | thin (0.41 in) | Yes | — |
| MB150LL/A | 160GB | Black | thick (0.53 in) | Yes | — |
| MB145LL/A | 160GB | Silver | thick (0.53 in) | Yes | — |
| MC297LL/A | 160GB (Late 2009) | Black | thin | Yes— fits | Fits the Late-2009 thin 160GB (MC293LL/A / MC297LL/A); that model is sold under the iPod Classic 7th Generation (Late 2009) pages. |
| MC293LL/A | 160GB (Late 2009) | Silver | thin | Yes— fits | Fits the Late-2009 thin 160GB (MC293LL/A / MC297LL/A); that model is sold under the iPod Classic 7th Generation (Late 2009) pages. |
Install and repair
Install Overview
Before You Start
Turn Hold off, use the reset sequence for this generation (hold Menu + Center until the Apple logo), and confirm the model and variant before opening the iPod.
Treat case opening as the highest handling risk. Work around the seams gently and stop if the shell, clips, or internal stack resist.
Do not pull the halves apart or side-load board sockets. Reseat nearby ribbons and connectors before blaming a replacement part.
Confirm the shield sits flat against the display with its tabs in the framework slots, and that no ribbon is trapped, before pressing the case fully closed.
After This Repair
| Check | What to do |
|---|---|
| Confirm physical fit | Check that the part sits flush, aligns with nearby openings, and does not pinch nearby parts. |
| Still not fitting cleanly? | Recheck nearby clips, screws, cables, connectors, and fitment before replacing another part. |
Access Guide
Product-specific placement, reassembly, and check
- Prepare and access. Confirm the exact model and listing fit first. This part is reached through the same teardown as the display — follow the disassembly steps on the Replacement LCD Screen page, gather the specified tools, disconnect power where applicable, and keep screws and cable positions organized.
- Place Replacement Metal LCD Shield. Seat the shield against the back of the display with its tabs in the framework's locating slots, then lower the display-and-shield stack into the framework as one unit. Do not press on the image area, and keep the display ribbon clear of the shield edge as it goes down.
- Reassemble without force. Reverse only the access steps needed for this repair, keep cables clear of case edges and screw posts, and close clips in stages.
- Validate before final closure. Before final closure, confirm image, backlight, and controls, and check that no cable or frame edge creates pressure on the panel.
Stop condition: Stop if a connector, latch, screw, clip, housing edge, or the replacement part resists normal alignment. Recheck model fit, orientation, cable routing, and trapped hardware instead of forcing it.
Troubleshooting
Do Not Buy / Problems This Part Does Not Fix
| Situation | Start here instead |
|---|---|
| You have an iPod Video 5G / 5.5G (A1136) | Use the iPod Video parts pages; this shield is listed for the Classic 6G/7G. |
| Only the screen is affected and everything else works | Start with the screen, display ribbon, and backlight checks for your model before buying this part. |
| Liquid, corrosion, or board-side damage changes the diagnosis | Use this part only when the visible fit, finish, or physical damage matches. |
| You see a folder icon, clicking noise, or restore failure | A folder with an exclamation mark means the iPod cannot find its storage — the drive, its ribbon cable, or the software on it. Check the drive or flash media, storage cable, adapter seating, formatting, and restore path before replacing any part. |
| You are not sure this internal shield is the damaged part | Confirm the generation — this shield is listed for every iPod Classic 6G/7G capacity and case depth, so the decision is condition and fit, not variant. |
| Sound is the only problem | Use the nearby diagnostic path that matches the exact symptom and part family. |
| A symptom points to a different part | Start with battery for power/runtime symptoms; hard-drive cable for folder, clicking, or restore symptoms; LCD screen for display-only symptoms; headphone jack for audio or Hold-switch symptoms; click wheel for click-wheel or control symptoms; logic board for board-side damage or multi-system symptoms before buying this part. |
| The problem is the Hold switch or headphone jack, not this part | Diagnose the exact-model headphone-jack/Hold assembly and its connector before choosing another part. |
| Charging, swelling, runtime, or power is the primary problem | Charging, USB recognition, sync, or dock behavior is intermittent or missing. The shield is passive structural support and will not fix this symptom family. |
Worth Knowing
- Confirm the removed shield shape and model route before ordering.
- Thin and thick rear panels are not interchangeable across drive classes, and the capacity engraving on a swapped rear panel will not match the installed drive.
Questions
Frequently Asked Questions
How do I choose the right internal support part?
Match the model generation. This shield fits every iPod Classic 6G/7G whatever its capacity, case depth or exterior color. It is chosen by physical fit and condition, not by color or finish.
Will this fix internal electronics symptoms?
No. This is an internal support part that cushions or holds hardware in place. Diagnose power, storage, audio, screen, and control faults separately.
How do I confirm this is the right internal support part?
Confirm the exact iPod Classic 6th Generation model and that the original part is missing, hardened, torn, bent, or compressed before ordering Replacement Metal LCD Shield. It is an internal part, so color and finish do not apply.
You May Also Want
The mid-chassis metal framework is the companion structural part.
Related: Replacement Screen (LCD Display)Replacing the shield usually means the LCD is already out — check its condition.
Related: Replacement Screw SetA fresh screw set helps when originals are stripped or lost.
Search terms
Why people land on this part
Also searched as: ipod classic 6th generation metal lcd shield replacement, ipod classic sixth generation metal lcd shield repair service, ipod classic sixth generation metal lcd shield replacement guide, ipod classic sixth generation replacement metal lcd shield kit.
Free diagnostic
Broken iPod? We can help.
Mail us your iPod and we will test it and send you a free repair quote. If you don't like our price, we will ship your iPod back at our expense.